Toxicology Report

Science-backed PDE/ADE, OEL & OEB derivation by certified toxicologists with ex-agency experts -

Ferric Ammonium Citrate

What is Ferric Ammonium Citrate?

CAS No: 1185-57-5

Ferric Ammonium Citrate is a pharmaceutical salt formed by ionic pairing of the active pharmacophore with a carefully selected counter-ion to optimise aqueous solubility, crystallinity, dissolution rate, and solid-state stability relative to the parent free form. Salt selection is a pivotal pharmaceutical development decision influencing polymorphic landscape, hygroscopicity, powder flow, compressibility, and bioavailability. Characterisation of Ferric Ammonium Citrate by XRPD, DSC, TGA, and dynamic vapour sorption is essential to define the approved solid-state form and ensure consistent quality across manufacturing batches.

The OEB assigned to Ferric Ammonium Citrate in pharmaceutical manufacturing is determined by structured potency banding based on its pharmacological target, NOAEL from repeat-dose studies, genotoxic classification under ICH M7, and reproductive toxicant status.

To derive PDE/ADE, OEL, and OEB values, Masuu Global follows a scientifically justified, risk-based toxicological assessment approach in accordance with internationally recognized guidelines and industry best practices that are widely accepted by regulatory authorities, including European Medicines Agency (EMA), Pharmaceutical Inspection Co-operation Scheme (PIC/S), and Agência Nacional de Vigilância Sanitária (ANVISA).

Request Your Assessment

Add this compound to your inquiry list and our team will follow up with full documentation, pricing, and licensing terms.

View Inquiry List →
What's included:
Full OEL derivation · ADE/PDE value · Control band assignment · All cited references · EMA / ICH Q9 compliance
9,000+
Toxicological & Exposure
Assessment Reports Delivered
70+
Subject Matter Experts
across global operations
12
In-House Ex-Agency
Toxicologists
3
Certification Bodies:
ERT · UKRT · DABT

Assessment Methodology

Masuu Global follows a scientifically justified, risk-based toxicological approach aligned with internationally recognized guidelines accepted by EMA, PIC/S, and ANVISA.

EMA – Guideline on Setting Health-Based Exposure Limits (HBELs)

Provides the framework for establishing scientifically justified PDE/ADE values for use in shared manufacturing facilities.

PIC/S – Shared Facilities and Contamination Control Guidance

Supports the application of HBEL-based approaches for cross-contamination prevention and cleaning validation.

ICH Q9 – Quality Risk Management

Provides a structured methodology for risk identification, assessment, control, communication, and review.

ICH M7 – Assessment and Control of DNA-Reactive (Mutagenic) Impurities (where applicable)

Applied for compounds with potential mutagenic or genotoxic concerns.

Risk-Based Toxicological Assessment

Comprehensive evaluation of available toxicological and pharmacological data, including NOAEL, LOAEL, BMDL, pharmacological potency, carcinogenicity, reproductive and developmental toxicity, sensitization potential, and target organ toxicity.

Weight-of-Evidence (WoE) Approach

Integration and critical review of all relevant data sources, including non-clinical studies, clinical studies, human exposure data, pharmacological information, post-marketing safety data, and structure–activity relationship (SAR/QSAR) assessments.

Report Preparation Process

Every assessment moves through a rigorous five-stage workflow — from data gathering to regulatory-ready delivery.

01

Comprehensive Data Review

Assessment of pharmacology, toxicology, clinical data, literature, and available regulatory information.

02

Scientific Evaluation

Identification of critical endpoints and selection of appropriate exposure limits.

03

PDE / HBEL Derivation

Transparent and scientifically justified calculations aligned with global toxicological principles.

04

Ex-Agency Expert Review (Our Differentiator)

Reports are reviewed with an ex-agency perspective, bringing regulatory expectations, inspection readiness, and practical implementation into every assessment.

05

Final Report Delivery

Regulatory-ready reports with scientific rationale, calculations, and clear recommendations by certified toxicologists (ERT, UKRT and DABT).

Why Masuu Global?

Our ex-agency toxicologists bring a practical regulatory perspective that transforms how assessments are built, reviewed, and defended.

✓

Regulatory expectation–driven assessments aligned with how authorities actually evaluate submissions.

✓

Inspection-ready reports — scientifically defensible and audit-prepared from day one.

✓

Faster review cycles with direct decision support from certified toxicologists (ERT, UKRT, DABT).

✓

Practical implementation recommendations that translate science into actionable contamination control.

✓

Reduced internal effort — offload complex assessments without sacrificing quality or defensibility.

✓

Global reach across PDE/ADE, HBEL, OEL, OEB, cleaning validation, and impurity assessments.

Ready to request your assessment?

Add this compound to your inquiry list, or browse our full database of 3,000+ molecules.

Frequently Asked Questions

Ferric Ammonium Citrate is a complex of iron(III) with citric acid and ammonium that may be used as an iron source in supplements, in food fortification, and as a laboratory reagent. A toxicological assessment helps define suitable exposure limits and handling controls for workers.

A PDE or ADE sets a health-based limit on daily exposure to Ferric Ammonium Citrate from residual carryover. Manufacturers use it in cross-contamination risk assessments and cleaning validation when the compound is processed in shared equipment or facilities. Whether a report is required depends on how it is used and on applicable regulatory expectations.

Yes. A limit does not depend on whether a substance is a finished drug. When direct data are limited, a documented approach can use read-across from related compounds, structure-based evaluation, and the information that does exist. Each assumption should be stated clearly, so reviewers can judge whether the resulting limit is scientifically justified for the intended use.

Each step is reviewed for how exposure could occur, for example through dust, vapor, splashes, or contact with equipment surfaces. The assessment links the exposure limit to the task, its duration, and the controls available, such as containment, ventilation, and protective equipment. This helps organizations match handling measures to the real operations in their facility.

Not usually. An OEB is a hazard category that guides handling and containment, and it is often used when data are limited or a quick classification is needed. An OEL is a numerical airborne limit derived from the evidence. Where an OEL can be justified, the two are complementary and should be reported together with their rationale.

An OEL is derived by reviewing the toxicological and occupational health evidence, identifying the critical effect, and applying a recognized assessment methodology. The final value should come with a documented rationale, clearly stated units, and the exposure duration it applies to, so it can be used confidently in workplace risk assessment.

An OEB places Ferric Ammonium Citrate in a hazard category using a defined banding framework and the available toxicological evidence. Criteria and numerical ranges differ between frameworks, so the report should identify the system used. The band then guides the level of containment and handling controls suited to the compound.

Not necessarily. A PDE or ADE is derived for a defined route of exposure, often oral for carryover into the next product. Extrapolating to inhalation or dermal exposure needs scientific justification, so the report should state the route, scope, and assumptions behind the value.

Process chemicals may be handled in larger quantities and in open or semi-open steps, which can increase the chance of worker exposure or carryover into later batches. A health-based exposure limit gives a documented benchmark for choosing proportionate controls, monitoring, and cleaning measures. It supports a consistent, risk-based approach across the manufacturing process.

A toxicological assessment characterizes the potential health hazards of Ferric Ammonium Citrate using the available data. It supports scientifically justified exposure limits, helps manufacturers choose proportionate handling and containment measures, and gives a documented basis for protecting workers and preventing cross-contamination in shared facilities.

Masuu Global follows a scientifically justified, risk-based approach aligned with internationally recognized guidance accepted by regulators, including the EMA guideline on health-based exposure limits, PIC/S guidance on shared facilities and contamination control, ICH Q9 quality risk management, and ICH M7 where applicable.

Use the Request Your Assessment option on this page and add Ferric Ammonium Citrate to your inquiry list. The Masuu Global team will follow up with full documentation, pricing, and licensing terms. Mention your intended use and market so the scope of the report can be confirmed.

Book a Demo