Ledipasvir is a direct acting antiviral (DAA) medication used as part of combination therapy to treat chronic Hepatitis C, an infectious liver disease caused by infection with Hepatitis C Virus (HCV). HCV is a single-stranded RNA virus that is categorized into nine distinct genotypes, with genotype 1 being the most common in the United States, and affecting 72% of all chronic HCV patients. Treatment options for chronic Hepatitis C have advanced significantly since 2011, with the development of Direct Acting Antivirals (DAAs) such as ledipasvir. More specifically, ledipasvir is an inhibitor of the Hepatitis C Virus (HCV) Non-Structural Protein 5A (NS5A), which is required for viral RNA replication and assembly of HCV virions. Although its exact mechanism of action is unknown, it is postulated to prevent hyperphosphorylation of NS5A which is required for viral protein production. It is effective against genotypes 1a, 1b, 4a, and 5a and with a lesser activity against genotypes 2a and 3a of HCV. Ledipasvir and other direct acting antivirals are very potent options for the treatment of Hepatitis C, as they exhibit a high barrier to the development of resistance. This is an important advantage relative to HCV drugs that target other viral enzymes such as the protease, for which rapid development of resistance has proven to be an important cause of therapeutic failure. In a joint recommendation published in 2016, the American Association for the Study of Liver Diseases (AASLD) and the Infectious Diseases Society of America (IDSA) recommend ledipasvir as a first line therapy option in combination with [sofosbuvir] for the treatment of HCV genotypes 1a, 1b, 4, 5, and 6. Treatment with ledipasvir is used with the intent to cure, or achieve a sustained virologic response (SVR), after 12 weeks of daily therapy. SVR and eradication of HCV infection is associated with significant long-term health benefits including reduced liver-related damage, improved quality of life, reduced incidence of Hepatocellular Carcinoma, and reduced all-cause mortality. Treatment with direct acting antivirals such as ledipasvir is associated with very minimal side effects, with the most common being headache and fatigue. Lack of significant side effects and short duration of therapy is a considerable advantage over older interferon- and ribavirin-based regimens, which were limited by infusion site reactions, reduced blood count, and neuropsychiatric effects. Since 2014, ledipasvir has been available as a fixed dose combination product with [sofosbuvir] (tradename Harvoni) used for the treatment of chronic Hepatitis C. Approved in October 2014 by the FDA, Harvoni is indicated for the treatment of HCV genotypes 1, 4, 5, and 6 with or without [ribavirin] depending on the level of liver damage or cirrhosis. When combined together, ledipasvir and sofosbuvir as the combination product Harvoni has been shown to achieve a SVR between 93 and 99% after 12 weeks of treatment. Its use has also proven successful in the treatment of HCV in patients co-infected with HIV.
Science-backed PDE/ADE, OEL & OEB derivation by certified toxicologists with ex-agency experts -
Ledipasvir
Drug Overview
What is Ledipasvir?
To derive PDE/ADE, OEL, and OEB values, Masuu Global follows a scientifically justified, risk-based toxicological assessment approach in accordance with internationally recognized guidelines and industry best practices that are widely accepted by regulatory authorities, including European Medicines Agency (EMA), Pharmaceutical Inspection Co-operation Scheme (PIC/S), and Agência Nacional de Vigilância Sanitária (ANVISA).
Request Your Assessment
Add this compound to your inquiry list and our team will follow up with full documentation, pricing, and licensing terms.
View Inquiry List →Full OEL derivation · ADE/PDE value · Control band assignment · All cited references · EMA / ICH Q9 compliance
Regulatory Framework
Assessment Methodology
Masuu Global follows a scientifically justified, risk-based toxicological approach aligned with internationally recognized guidelines accepted by EMA, PIC/S, and ANVISA.
EMA – Guideline on Setting Health-Based Exposure Limits (HBELs)
Provides the framework for establishing scientifically justified PDE/ADE values for use in shared manufacturing facilities.
PIC/S – Shared Facilities and Contamination Control Guidance
Supports the application of HBEL-based approaches for cross-contamination prevention and cleaning validation.
ICH Q9 – Quality Risk Management
Provides a structured methodology for risk identification, assessment, control, communication, and review.
ICH M7 – Assessment and Control of DNA-Reactive (Mutagenic) Impurities (where applicable)
Applied for compounds with potential mutagenic or genotoxic concerns.
Risk-Based Toxicological Assessment
Comprehensive evaluation of available toxicological and pharmacological data, including NOAEL, LOAEL, BMDL, pharmacological potency, carcinogenicity, reproductive and developmental toxicity, sensitization potential, and target organ toxicity.
Weight-of-Evidence (WoE) Approach
Integration and critical review of all relevant data sources, including non-clinical studies, clinical studies, human exposure data, pharmacological information, post-marketing safety data, and structure–activity relationship (SAR/QSAR) assessments.
How We Work
Report Preparation Process
Every assessment moves through a rigorous five-stage workflow — from data gathering to regulatory-ready delivery.
Comprehensive Data Review
Assessment of pharmacology, toxicology, clinical data, literature, and available regulatory information.
Scientific Evaluation
Identification of critical endpoints and selection of appropriate exposure limits.
PDE / HBEL Derivation
Transparent and scientifically justified calculations aligned with global toxicological principles.
Ex-Agency Expert Review (Our Differentiator)
Reports are reviewed with an ex-agency perspective, bringing regulatory expectations, inspection readiness, and practical implementation into every assessment.
Final Report Delivery
Regulatory-ready reports with scientific rationale, calculations, and clear recommendations by certified toxicologists (ERT, UKRT and DABT).
Ex-Agency Advantage
Why Masuu Global?
Our ex-agency toxicologists bring a practical regulatory perspective that transforms how assessments are built, reviewed, and defended.
Regulatory expectation–driven assessments aligned with how authorities actually evaluate submissions.
Inspection-ready reports — scientifically defensible and audit-prepared from day one.
Faster review cycles with direct decision support from certified toxicologists (ERT, UKRT, DABT).
Practical implementation recommendations that translate science into actionable contamination control.
Reduced internal effort — offload complex assessments without sacrificing quality or defensibility.
Global reach across PDE/ADE, HBEL, OEL, OEB, cleaning validation, and impurity assessments.
Ready to request your assessment?
Add this compound to your inquiry list, or browse our full database of 3,000+ molecules.
Frequently Asked Questions
Ledipasvir is an inhibitor of the hepatitis C virus NS5A protein, used in combination with sofosbuvir to treat chronic hepatitis C. It is a small-molecule antiviral handled as a solid. A health-based exposure assessment supports safe handling and cleaning validation.
A PDE or ADE sets a health-based limit on daily exposure to Ledipasvir from residual carryover. Manufacturers use it in cross-contamination risk assessments and cleaning validation when the compound is processed in shared equipment or facilities. Whether a report is required depends on how it is used and on applicable regulatory expectations.
Published toxicity data can be limited for some substances. A risk-based approach can then draw on related compounds, structure-based evaluation, and the data that do exist, with each assumption documented. For potentially mutagenic compounds, ICH M7 principles may be applied where applicable.
The pharmacological class of Ledipasvir, an HCV NS5A inhibitor, can influence which effects appear first at low exposure. When this applies, the PDE or OEL may be based on pharmacological activity rather than on classical toxicity findings. The assessment therefore considers mechanism of action, potency, and the dose range at which effects may occur in exposed people.
Where Ledipasvir has been used as a medicine, clinical dose information can help identify the lowest dose with a pharmacological effect, which may serve as a starting point for the PDE. The relevance depends on the population, route, and duration of use, and on how well the data are documented. Such data are considered together with non-clinical findings.
An OEL is derived by reviewing the toxicological and occupational health evidence, identifying the critical effect, and applying a recognized assessment methodology. The final value should come with a documented rationale, clearly stated units, and the exposure duration it applies to, so it can be used confidently in workplace risk assessment.
An OEB places Ledipasvir in a hazard category using a defined banding framework and the available toxicological evidence. Criteria and numerical ranges differ between frameworks, so the report should identify the system used. The band then guides the level of containment and handling controls suited to the compound.
A carryover evaluation estimates how much residue of Ledipasvir could remain on shared equipment and transfer into the next product. The PDE is compared with the worst-case residue, using batch size, the maximum daily dose of the next product, and equipment surface area. Cleaning studies then show whether residues stay below the limit.
The PDE sets the maximum daily amount of Ledipasvir that could safely carry over into the next product. Manufacturers convert this into acceptance limits for residues on shared equipment, taking batch sizes and equipment surface area into account. A documented, scientifically justified PDE makes the cleaning validation approach easier to defend during inspections.
Yes, it can. Powders, granulated material, and solutions create different exposure potential, because dust generation, particle size, and handling steps change how much material may become airborne or reach the skin. The assessment should state the form and process assumed so that controls match the way the material is actually handled.
Masuu Global follows a scientifically justified, risk-based approach aligned with internationally recognized guidance accepted by regulators, including the EMA guideline on health-based exposure limits, PIC/S guidance on shared facilities and contamination control, ICH Q9 quality risk management, and ICH M7 where applicable.
Use the Request Your Assessment option on this page and add Ledipasvir to your inquiry list. The Masuu Global team will follow up with full documentation, pricing, and licensing terms. Mention your intended use and market so the scope of the report can be confirmed.
